Plumbing is an important part of the whole building, be it residential or commercial. Also, it is one of the most neglected parts as the pipelines mainly stay out of sight. When was the last time you had your commercial or residential plumbing system checked? Well, if it has been a long time, then you need to make sure that you are following some of the important points to ensure the plumbing line is working fine. You need to follow a complete plumbing maintenance checklist to ensure everything is in working condition.
Plumbing Maintenance Checklist
We are here to provide you with the checklist. First of all, you need to understand the benefits of having this checklist. This will help you identify the wear and tears in the pipeline and also how much the corrosion has affected the pipeline.
Checklist for Plumbing Maintenance
- Active Leaks
You have to look for any active leaks in the pipeline. Any pipeline maintenance will need you to check the signs of the active leaks, including the water spots, moisture and puddles. You can look for the growth of molds and mildew to identify the leaks.
- Signs of Corrosion
You need to inspect and find out if there is any sign of corrosion visible. This is usually a plumbing issue that is commonly found in older homes. If you find the presence of limescale around the facets of water and in shower heads, then the corrosion is there. The presence of corrosion signifies that the pipelines must be changed immediately.
- Water Pressure
You have to check the pressure of the water. The optimal pressure of the water should not be more than that of 80 psi and it should not be less than 40 psi. Whereas high pressure of water can cause pipes to get damage, low pressure can cause problems too.
- Checking Valves
One needs to check the valves present in the plumbing system in order to make sure that it is working perfectly. Broken valve can lead to incorrect flow of water and hence it should be replaced soon.
- Inspect the Water Heater
The water heater must be inspected on a regular basis in order to inspect whether or not it is operating at the right temperature. This is important for the safety of the people who are residing in the home or in the commercial building.
- Checking the Drains
All the drains of the building must be tested for the right flow rate. In case of any clogged drains or slow drains are being identified, it must be restored back to normal for the right flow and drainage of water.
- Backflow Testing
This is also very important to test as you have to prevent backflow. An annual backflow testing will prevent the water system from flowing backward.
Conclusion
So, this is the plumbing maintenance checklist that you have to follow. This maintenance checklist must and should be followed once a year as an annual checkup but you can also do it once in six months. This will ensure that the drainage system of your residential building or commercial building is being working at a good rate. Worst comes to worst, reach out to a local plumber to answer any of your other questions.